Home Feedback Contact Us
 

For more information, please contact us at
Tel: 603-6272 7607
Fax: 603-6272 7610
Email: enquiry@magroller.com
 



Click here to link to Pamos.com.my
 
 

Process
 

Click on the small images below to enlarge.
 

Direction to use Pamos Coating Solution to rejuvenates mag roller
 

1.

 Wipe clean the mag roller with a clean cloth or tissue.


Figure 1
 
Figure 2
Figure 3

Figure 4
 
Figure 5
Figure 6
 

2.

 Use a piece of cotton swab from the pack and apply over the entire surface of the mag roller.

Figure 7
 
Figure 8
Figure 9

Figure 10
 
Figure 11
Figure 12
 

3.

 Using an oil absorbent paper towel, roll in the oil moistened mag roller with the paper towel, wrapping round the entire mag roller completely.

Figure 13
 
Figure 14		  
 

4.

 Roll the mag roller wrapped in the paper towel over a flat surface or table with both palms. Press slightly and roll it forward and backward over your palm.

Figure 15
 
Figure 16
Figure 17

Figure 18
 		    
 

5.

 Remove the paper towel. Wipe away any remnants of oil that may be on the mag roller with a clean paper towel so as to get a dry mag roller.

Figure 19
 
Figure 20
Figure 21

Figure 22
Figure 23		  
 

6.

 Re-fit the mag roller into the cartridge hopper.

7.

 Use 1 piece of cotton swab per mag roller.
 
 

Home  l   What is Pamos Coating Solution   l   Process   l   Packing of Pamos Coating Solution   l   Specification
Case Study  l   Product Enquiry   l   Feedback  l   Contact Us